Executive office chair bike :D
Moderators: IRalic, Moderatori
-
- Freebiker
- Posts: 1786
- Joined: 29 Mar 2005, 23:59
- Location: Home is where the bike is :D
- Contact:
Executive office chair bike :D
http://www.makezine.com/blog/archive/20 ... 6B48984890
Ko je ono rekao da je sediste na bentu komplikovana stvar ?
`
-
- Posts: 117
- Joined: 08 Jul 2007, 21:57
-
- Posts: 117
- Joined: 08 Jul 2007, 21:57
http://recumbent-canada.blogspot.com/
Here is a easy way to make a hard shell recumbent seat on the cheap. All you need is some 1/2 inch ply for the side rails and some 1-1/2 by 1/2 inch slats cut to the right lengths. Then glue and screw together. I have not made one like this but I am positive it will work. Here is a link to a PDF file with some dimensional information
http://www.archive.org/download/Hardshe ... t_seat.pdf
Here is a letter size paper print out that you can cut up to make a full size profile.
http://www.archive.org/download/RibSeat/Rib.PDF
And here is the DXF file
http://ia301109.us.archive.org/1/items/ ... rofile.DXF
prosto
pozz
Here is a easy way to make a hard shell recumbent seat on the cheap. All you need is some 1/2 inch ply for the side rails and some 1-1/2 by 1/2 inch slats cut to the right lengths. Then glue and screw together. I have not made one like this but I am positive it will work. Here is a link to a PDF file with some dimensional information
http://www.archive.org/download/Hardshe ... t_seat.pdf
Here is a letter size paper print out that you can cut up to make a full size profile.
http://www.archive.org/download/RibSeat/Rib.PDF
And here is the DXF file
http://ia301109.us.archive.org/1/items/ ... rofile.DXF
prosto
pozz